SV Elastosil 4850 Ceev Kho Lub Hom Phiaj Siab Modulus Acid Silicone Adhesive
Product Description
NTA
1. Tsis ntws
2. Extrudability zoo heev los ntawm qhov kub thiab txias (+ 5 ° C) mus rau qhov kub siab (+ 40 ° C)
3. Tsawg kho shrinkage
4. Ua tau zoo los ntawm qhov kub thiab txias (-40 ° C) mus rau qhov kub siab (+ 180 ° C)
5. Kev kho sai: luv tack dawb lub sij hawm
6. Lub neej ntev
7. Solvent dawb
8. Siab modulus
9. Kev tsim kho kev ua haujlwm zoo
10. Zoo heev adhesion rau iav, glazed, pobzeb, ntau yam yas thiab coated nto
zog knot
Xim
SIWAY® 4850 muaj nyob rau hauv dub, grey, dawb thiab lwm yam xim customized.
Ntim
200l yas cartridges
YUAV TSUM siv
1.Kev tsim kho iav thiab qhov rais
2.Seals pob qij txha ntawm glazing thiab framing (thav duab, kab teeb, mullions)
TSEEM CEEB
Cov txiaj ntsig no tsis yog tsim los siv rau hauv kev npaj tshwj xeeb
| Uncured sealant | ||
| kev ua tau zoo | txheem xeem | cov ntaub ntawv |
| Qhov ceev 23 ° C | ISO 1183, Txoj Kev A | 1.01 * [g / cm³] |
| Sag | ISO 7390, U-groove | Tsis sag |
| Extrusion tus nqi | 23°C PV 08127 | 270 [ml / min] |
| Kho tus nqi 23 ° C / 50% txheeb ze humidity | kwv yees.3 [hli / 24h] | |
| Lub sij hawm tsim daim tawv nqaij 23 ° C / 50% txheeb ze humidity | [min] 8 | |
| Kho sealant (kho rau 4 lub lis piam ntawm 23 ° C / 50% txheeb ze av noo) | ||
| Tensile zog | ISO 8339 Kev Tswj Xyuas Kev Lag Luam | 0.70 [N/mm²] |
| Elongation thaum so | ISO 8339 Kev Tswj Xyuas Kev Lag Luam | 180% |
| Modulus (100%) | ISO 8339 Kev Tswj Xyuas Kev Lag Luam | 0.50 [N/mm²] |
| Hardness, Ntug A | TS EN ISO 868 | 23 |
KHOOM PLIG THIAB TIV THAIV
SV4850 yuav tsum khaws cia hauv qab 25 ℃ hauv cov thawv tsis tau qhib.Nws muaj lub neej txee ntawm 18 lub hlis txij li hnub tsim khoom.
